Perth - Arbroath - Blairgowrie - Crieff - Cupar - Dundee - Dunblane - Dunning - Killin - Kinross - Montrose - Pitlochry - St Andrews

tv transmitters (including new digital switchover frequencies)

Angus (Tealing) digital & analogue television and radio transmitter. Click for Perth and Tay Bridge

Site Owner: Arqiva   Location: See map below                                                 Site Height: Structure Height: 229.5m
Analogue TV: BBC1: 57  BBC2: 63  ITV1: 60  Ch4: 53    
Digital TV: Mux1: 68 Mux2: 66 MuxA: 59 MuxB: 62 MuxC: 56 MuxD: 65
AFTER SWITCHOVER,  Mux D3+4 C53, Mux SDN C54, Mux BBCB C57, Mux ArqA C58, Mux BBCA C60 Mux ArqB C61       Ind. National Radio: Classic FM: 100.1    
Ind. Local Radio:     
      
Digital Radio: BBC: 12B  Digital One: 12A  Bauer Dundee & Perth: 11B    

Tay Bridge

On the evening of 15-Jun-2006 the Tay Bridge relay was put off the air by a feeder cable fire.

Site Owner: Arqiva Location: See map below                                                                            Structure Height: 45m
Analogue TV: BBC1: 51  BBC2: 44  ITV1: 41  Ch4: 47 Ch5: 34 
Digital TV:  AFTER SWITCHOVER: Mux BBCA C41, Mux BBCB C44, MUX D3+4 C47, Mux New7 C51      
BBC Radio:          
      
Ind. National Radio:    
Ind. Local Radio: Tay FM: 102.8
      
Digital Radio: None         
Comments: Relay of Angus
 

Perth Television transmitter

Location: See map below                                         Site Height: 122m Structure Height: 45.7m
Analogue TV: BBC1: 39  BBC2: 45  ITV1: 49  Ch4: 42 Ch5: 55 
Digital TV: AFTER SWITHOVER: Mux BBCA C49, Mux BBCB C45, MUX D3+4 C42, Mux New7 C30        
BBC Radio:          
      
Ind. National Radio:    
Ind. Local Radio: Tay FM: 96.4    
      
Digital Radio: Transmitted from Kirkton Mailer          
Comments: Relay of Angus/Craigkelly (Analogue BBC Feed from Craigkelly, ITV and Channel 4 from Angus)                                                                                                                                                                          

site last updated  5th march 2010

Earn Valley Aerials are not responsible for the content of external websites you may click through from this site.